城市低碳群体建筑外部边缘空间规划仿真研究

针对当前空间规划方法存在的计算时间长、规划成本高等问题,提出一种基于蚁群算法的低碳群体建筑外部边缘空间规划方法。依据城市低碳群体建筑外部边缘空间的模糊特性,引入模糊集合理论对建筑外部边缘空间进行理解和建筑外部边缘空间模糊矩阵的构建,对边缘空间进行划分和限定。结合建筑外部边缘空间的特性和具体关系模式进行空间层次划分,计算空间属性权重,以此确立空间规划目标,根据空间规划目标函数构建空间规划模型,设定求解空间规划模型的蚁群算法信息素更新方式,依据个体信息素转移概率指导个体进行模型最优解搜索。实验结果表明,所提方法与传统的空间规划方法相比,有效减少了计算时间,降低了规划成本。     

Performance evaluation of two-worker operations in a worker-to-cell order assorting system

This paper studies an order assorting system (OAS) composed of multiple-parallel order assorting aisles (OAAs) in a retailer’s order fulfillment center. We evaluate two worker-assignment policies for a worker-to-part OAA: a dedicated-assignment policy and a shared-assignment policy. Our analytical models evaluate the mean value and variance of worker process time including assorting time, walk time, empty walk time, and blocking time when single-line products arrive randomly. From the worker process time, we identify the system flow time of product lines per each worker-assignment policy using G/G/1 and G/G/2 queuing models. We find that the shared-assignment policy performs better compared to the dedicated-assignment policy in spite of workers’ productivity losses incurred by blocking delays over high sort probability, slow walk speed, and high magnitude and variations of inter-arrival times. At the worker-centric break-even point of worker process time, where worker process time suggests selecting either policy, system flow time always suggests selecting the shared-assignment policy.     

基于粒子群优化算法的五自由度机械臂轨迹规划

为了让机械臂的工作时间达到最优,以自主研发的抛光机器人样机为研究对象,针对手表表壳表耳部分的抛光过程,提出PSO算法对五自由度机械臂轨迹规划进行优化,并通过MATLAB软件进行机械臂的仿真与分析。仿真结果表明,基于PSO算法的轨迹规划使机械臂在工作过程中加加速度不会产生突变,运动轨迹精度高,机械臂工作时间达到最优。     

CMIP5气候模式对未来30年太阳辐射变化的预估研究

使用CMIP5中33个全球气候模式的模拟数据,选择中位数集合方案,分别在RCP4.5和RCP8.5情景下对2006~2050年全球所有天气条件下地表接收到的太阳辐射、无云条件下地表接收到的太阳辐射、相对湿度、近地层风速、近地层气温和云量的变化进行预估研究。结果表明:1)在RCP8.5情景下,气温的增温率在50°N以北地区最大,达0.12 K/a。同时北半球增温率大于南半球,陆表气温的增温率大于海表气温;2)在RCP4.5和RCP8.5情景下,中国东南部和欧洲中东部地区的地表太阳直接辐射呈现较大正趋势;3)在所选3个区域中,不同RCP情景下地表太阳辐射均呈现正趋势,其中在RCP8.5情景下法国波尔多地表太阳辐射呈现最大正趋势。     

基于压迫感分析的城市高架桥美学设计研究

为解决城市高架桥对其地面道路及周边地块产生的压迫感这一问题,并且指导城市高架桥的设计和规划,使之在满足交通功能和用地要求的同时兼顾美学的考虑,研究根据压迫感主要来源为建筑对视野限制的推论,分析了压迫感的主要影响因素为建筑在视野中形成的视角,讨论了现有立体角理论模型的适用性,并且结合城市高架桥视角的特点,将立体角理论模型简化为平面视角理论模型以增强其适用性。建立了桥梁的结构尺寸与影响点的视角的关系式,以压迫感接受率表征压迫感的大小,再根据调查统计数据拟合,确定视角与压迫感接受率的关系曲线,从而得到桥梁的结构尺寸与影响点压迫感接受率的关系式。在规划和设计时,可根据该公式合理确定桥梁下地面道路的红线宽度或两侧地块的退红净距。     

无线传感器网络中移动sink节点的路径规划

在无线传感器网络中,大量感知数据汇集到sink节点的采集方法会导致sink节点附近的节点能量耗尽,造成能量空洞。针对该问题,利用移动的sink节点进行数据收集是一种解决方法,其中移动sink的路径规划成为一个重要的问题。提出了一个移动sink路径规划算法,将无线传感器中随机分布的节点划分为不同的子区域,寻找sink节点移动的最佳转向点,最终得到最优的移动路径,以实现无线传感器网络生命周期最大化。仿真实验表明,与现有方案相比,该算法能显著延长网络的生命周期。     

Correlating indoor and outdoor temperature and humidity in a sample of buildings in tropical climates

The incidence of several respiratory viral infections has been shown to be related to climate. Because humans spend most of their time indoors, measures of indoor climate, rather than outdoor climate, may be better predictors of disease incidence and transmission. Therefore, understanding the relationship between indoor and outdoor climate will help illuminate their influence on the seasonality of diseases caused by respiratory viruses. Indoor-outdoor relationships between temperature and humidity have been documented in temperate regions, but little information is available for tropical regions, where seasonal patterns of respiratory viral diseases differ. We have examined indoor-outdoor correlations of temperature, relative humidity (RH), and absolute humidity (AH) over a 1-year period in each of seven tropical cities. Across all cities, the average monthly indoor temperature was 25 ± 3°C (mean ± standard deviation) with a range of 20–30°C. The average monthly indoor RH was 66 ± 9% with a range of 50–78%, and the average monthly indoor AH was 15 ± 3 g/m³ with a range of 10–23 g/m³. Indoor AH and RH were linearly correlated with outdoor AH when the air conditioning (AC) was off, suggesting that outdoor AH may be a good proxy of indoor humidity in the absence of AC. All indoor measurements were more strongly correlated with outdoor measurements as distance from the equator increased. Such correlations were weaker during the wet season, especially when AC was in operation. These correlations will provide insight for assessing the seasonality of respiratory viral infections using outdoor climate data, which is more widely available than indoor data, even though transmission of these diseases mainly occurs indoors.     

国土空间规划体系的海洋管理及规划发展研究

海洋空间规划作为一种基于生态系统的多用途海洋管理方法和技术手段，也是解决现代社会经济发展中人类行为活动与海洋生态环境保护之间冲突的有效工具。以国土空间规划体系改革和自然资源统一管理为背景，讨论了全要素空间规划体系下的陆海统筹要求，同时对国内外海洋管理及规划研究成果进行综述分析，并结合深圳市海岸带规划编制内容总结了陆海一体化的海洋管理和空间规划优秀经验，从整合海洋空间规划体系、搭建综合管理平台、健全实施监管机制等方面提出了海洋规划管理的框架思路，对未来陆海统筹的海洋空间规划做出发展构想。     

电信运营商云网规划数字化研究和实现

基于电信运营商数字化转型，系统性地提出了数据驱动的云网发展规划体系，以及六大关键数字化能力构建，设计和实现了一种云网规划数字化平台，该平台可用于实现目标网络精细规划、边缘计算精准预测等场景，并探讨了数字孪生在规划领域的应用前景，对运营商推进云网融合战略、推进高质量发展具有指导和参考意义。     

Simulation of interaction between high-temperature process and heat emission from electricity system in summer

During the hot summer season, using electricity systems increases the local anthropogenic heat emission, further increasing the temperature. Regarding anthropogenic heat sources, electric energy consumption, heat generation, indoor and outdoor heat transfer, and exchange in buildings play a critical role in the change in the urban thermal environment. Therefore, the Weather Research and Forecasting (WRF) Model was applied in this study to investigate the heat generation from an indoor electricity system and its influence on the outdoor thermal environment. Through the building effect parameterization (BEP) of a multistorey urban canopy scheme, a building energy model (BEM) to increase the influence of indoor air conditioning on the electricity consumption system was proposed. In other words, the BEP+BEM urban canopy parameterization scheme was set. High temperatures and a summer heat wave were simulated as the background weather. The results show that using the BEP+BEM parameterization scheme of indoor and outdoor energy exchange in the WRF model can better simulate the air temperature near the surface layer on a sunny summer. During the day, the turning on the air conditioning and other electrical systems have no obvious effect on the air temperature near the surface layer in the city, whereas at night, the air temperature generally increases by 0.6 ℃, especially in densely populated areas, with a maximum temperature rise of approximately 1.2 ℃ from 22:00 to 23:00. When the indoor air conditioning target temperature is adjusted to 25–27 ℃, the total energy release of the air conditioning system is reduced by 12.66%, and the temperature drops the most from 13:00 to 16:00, with an average of approximately 1 ℃. Further, the denser the building is, the greater the temperature drop.